· Communicate and understand customer requirements.

溝通和理解客戶需求。

· Electrical design based on customer requirements and mechanical structure, providing drawings and BOMs.

根據客戶需求及機械結構進行電氣設計，完成原理圖、BOM和接線表等的設計。

· Design, assembly and test local projects and modules.

本地項目及模塊的設計、安裝及調試。

· localize machines and components from headquarters.

對總部的機器進行國產化。

· Provide test verification plan and conduct corresponding tests.

提供測試驗證方案并進行相應測試。

· Support and resolve customer feedback on site.

支持并解決客戶現場反饋的問題。

· Prepare related technical documentation.

相關技術文檔編制。

· 2 years+ of electrical design experience, preferably in the wiring harness industry or non-standard design experience.

2年以上電氣設計經驗，線束行業或非標設計經歷優先。

· Proficient in software: ECAD (E3, EPLAN, etc.), MS Office, SAP.

熟練使用軟件: 電氣制圖軟件如E3, EPLAN等, MS Office, SAP。

· Be good at communication and coordination skills, English communication preferred.

良好的溝通協調能力，英語溝通者優先。

· Experienced in PLC/HMI programming for Beckhoff/Inovance/Delta etc., proficient in using ladder diagrams/structured text programming, familiar with IEC61131-3 standard programming.

有倍福/匯川/臺達等PLC以及HMI界面編程經驗，熟悉IEC61131-3標準編程。

· Familiar with EtherCAT and motion control.

熟悉EtherCAT現場總線及運動控制。